Evapo-Rust©
is the obvious rust remover because it is water-based and safe to use.
This award-winning and innovative product is distinguished by being
acid-free, which is why it is a non-aggressive product like many others.
The removal of rust is done without any mechanical influence, such as
sanding or scrubbing of the parts to be de-rusted.
Evapo-Rust© can be reused several times and Evapo-Rust© has an unlimited lifespan when properly stored.
Evapo-Rust©
does not attack other materials such as aluminum, brass, copper, wood,
glass, rubber and the biodegradable formula makes the product safe to
use.
Evapo-Rust©
works by absorbing iron oxide (rust) and when the rust is dissolved,
the process stops and the item is therefore not damaged by lying a
little longer in the liquid.
When
the rust is gone, simply rinse the item in warm water from the tap and
any deposits are brushed off with a stiff brush or scouring sponge. Then
the workpiece is ready for finishing.
Evapo-Rust©
Thermocure is specially developed to remove rust from cooling systems
on internal combustion engines. It is the perfect rust remover because
it is Water-based and at the same time non-toxic to the user and the
environment. This Award-winning product with its biodegradable formula,
removes rust Effectively.
The
liquid loosens the rust, which is then absorbed into the liquid with it
Active ingredient. The active ingredient in the liquid only binds to
iron oxide (rust), and when the rust is dissolved, the process stops. It
means that the liquid does not attack metal that is free of rust and
also does not other metals such as aluminum, zinc, copper.
Da
Evapo-Rust© Thermmocure does not contain corrosive liquids such as acid
or strong detergents, Evapo-Rust© Thermocure has no effect on plastics,
viton, PVC, glass, wood, leather, gaskets, rubber and paints that are
not is colored with iron oxide as a pigment.
Evapo-Rust©
Thermocure removes rust very effectively and without the need for
aftercare. Evapo-Rust© Thermocure is based on the original Evapo-Rust©
won the award for innovative products in the United States, and the
product has built a solid reputation among end-users and certain parts
of the industry in the United States.
Great
multifunctional, non-flammable and slow-drying water-based cleaner for
heavy dirt in areas where food processing. Water-based degreaser, e.g.
approved for use in food industry, NSF A1 registered. Suitable for
cleaning components to be prepared for treatment in our Evapo-Rust© rust
springs. ECO Complex Blue is also suitable for cleaning lighter dirty
engines on cars/motorcycles and it easily and easily removes the oil
film that forms after a long time.
ECO
Complex Blue can also be used on plastics and all washable surfaces as
it removes oil, grease and stubborn stains. Free of phosphate and EDTA
ECO
Complex Blue can also be used in high-pressure/steam cleaners and the
Works with both cold or hot water. When cleaning fabrics, it is
recommended to test on an area that is not visible first. ECO Complex
Blue is NOT suitable on leather or wood surfaces as they have a tendency
to absorb the liquid.
Undiluted
Suitable
For use on machine/machine parts to remove oil and grease. Surface
first wet with water and then spray the product on and leave it sit for a
few minutes. Rinse or wipe with a damp cloth or sponge. Severe deposits
may require a little scrubbing and the process may be repeated.
Finally, rinse with clean water.
Diluted
They
best results are achieved with warm water (preferably above 50 degrees
C) and we recommend 4 parts water to 1 part ECO Complex Blue (4:1). If
the desired effect is not achieved, then the concentration can be
increased or washed The process can be repeated. Rinse with clean water.
Fas
Dry Degreaser is a fast-drying degreaser that does not leave any
stains. Suitable for removing oil and grease and also burnt-on fats.
Good compatibility with most plastics.
The symbol on the container indicates that it can be used upside down to facilitate access to narrow and hard-to-reach areas. Does not contain silicone.
The symbol indicates that 95% of the content is the active product. This is due to a change in technology with the propellant.
Braklube
Plus Pro is a special lubricant for assembling brake components with
well-balanced viscosity, which means that it does not drip off, even at
high temperatures.
Counteracts
squealing brakes and good water and dirt-repellent properties. Brake
clubs contain no metal particles which makes the product very compatible
with ABS systems and also calipers made of aluminum.
Pressurized container as the product easy to apply with one hand.
