Evapo-Rust© should be used at temperatures between 15° and 30° Celsius to work optimally.
Items
to be derusted must be free of grease/oil and loose dirt. Is there a
lot of rust and any loose rust, then it should be knocked off before
treatment. (it gives the product longer lifetime).
Place
the items in a suitable container and pour the liquid over so that the
items are covered by the liquid, and if necessary, cover the container
to avoid too much evaporation. Any evaporated liquid is replaced with
tap water. (The product is intended to be used in an undiluted state).
Depending
on the amount of rust, the process lasts between 30 minutes and 12
hours, and the items are NOT harmed if they are left for a long time if
it proves necessary.
Evapo-Rust©
does NOT attack other metals such as aluminum, zinc, brass, copper,
tin, bronze and chrome, nor wood, plastic, glass, vinyl and paint unless
the pigment in the paint is based on on iron oxide.
When all rust has dissolved, clean the items with hot tap water, and eventually brush with a stiff brush or scrub sponge.
Then
the work piece is dried and it is ready for the desired finishing. If
you don't want to brown, paint or oil your work pieces immediately, then
you can briefly dip your work piece Immerse in Evapo-Rust© and then let
it air dry. This protects the work piece from new rust formation for a
few weeks, when stored indoors.
Storage:
Since Evapo-Rust© can be used several times, all you have to do is pour
the product back in the can, and save it for next time. Evapo-Rust© has
an unlimited lifespan if properly stored, and Evapo-Rust© does not
tolerate frost!
Evapo-Rust should be kept out of the reach of children.
Evapo-Rust©
can be used several times and when the liquid has lost its effect (The
liquid becomes very dark/black), then it is simply handed in at the
local recycling station.
In
order to use Thermocure correctly, the engine cooling system must be
emptied of its coolant (Used coolant should be disposed of according to the
manufacturer's instructions). Rinse the cooling system with clean water
so that the glycol content is reduced as much as possible.
Evapo-Rust© Thermocure
is poured into the cooling system and topped up with clean water. Glycol should not be used with Evapo-Rust© Thermocure.
Evapo-Rust© Thermocure does not attack other metals such as aluminum,
brass, copper, zinc and others. Nor gaskets, rubber seals and radiator
hoses.
The
engine/car is then operated normally and can be used for several days, up to 1
week or as needed. It should be expected that the liquid will become
significantly darker during the period of use. When the treatment is
completed, the liquid is drained into a suitable container and it may be
reused. You can test if the fluid still works by putting a rusty
bolt/screw in the liquid. If the rust has disappeared the next day, the
liquid will still work.
Exhausted Evapo-Rust Thermocure must be handed in at the recycling station, as there may be residues of glycol in the liquid.
The
cooling system is rinsed again with clean water until only clean water
flows out, and then normal coolant and water are refilled according to
the manufacturer's instructions.
ECO Complex Blue is a water-based degreaser that is environmentally friendly and biodegradable.
Eco
Complex Blue can be used as is, or diluted up to 1/50 according
to how dirty the items to be cleaned are. The product is suitable for use in either cold or hot water and it can also be used in ultrasonic cleaners with the temperature set to Max 50°C.
Eco
Complex Blue is sprayed onto the work piece and depending on the amount
of dirt, it can make cleaning easier to scrub/brush. If necessary, let the
product sit 1/2 minute and then rinse with water. Repeat the process if
necessary.
Thick
layers of accumulated dirt "cakes of oil and soil/dust" may require cleaning with steam/pressure washer before finishing with ECO
Complex Blue for optimal results. Eco Complex Blue is also safe to use
on surfaces that come in contact with food.
CRC
Rust Off is specially made to penetrate rust to effectively loosen rusted
items. The rust remover has fast-acting oils with good penetrating
properties that actively go in and lubricate the items to be loosened.
Properties:
Sample text. Click to select the text box. Click again or double click to start editing the text.
